node1:/var/log # ntpdc -p (uses sec instead of ms).
remote local st poll reach delay offset disp
=======================================================================
=LOCAL(0) 127.0.0.1 10 64 377 0.00000 0.000000 0.03053
*circle.net 16.88.11.29 2 512 377 0.06363 -0.017075 0.11371
=netservice 16.88.11.29 16 1024 0 0.00000 0.000000 3.99217
=ntp1.iso 16.88.11.29 3 512 377 0.11404 -0.010279 0.10500
node1:/var/log #
“+” – Good and a preferred remote peer or server (included by the combine algorithm)
“*” – The remote peer or server presently used as the primary reference;
poll : NTP polls each peer every “poll” seconds.
when : is relative time of last poll.
reach : track of last successful polls, 377 is best.
Delay : is network delay, this is fine
offset : offset between local and peer clock (ms) and it should be low.
jitter : Mean deviation (jitter) in the time reported for that remote peer or server.
remote local st poll reach delay offset disp
=======================================================================
=LOCAL(0) 127.0.0.1 10 64 377 0.00000 0.000000 0.03053
*circle.net 16.88.11.29 2 512 377 0.06363 -0.017075 0.11371
=netservice 16.88.11.29 16 1024 0 0.00000 0.000000 3.99217
=ntp1.iso 16.88.11.29 3 512 377 0.11404 -0.010279 0.10500
node1:/var/log #
“+” – Good and a preferred remote peer or server (included by the combine algorithm)
“*” – The remote peer or server presently used as the primary reference;
poll : NTP polls each peer every “poll” seconds.
when : is relative time of last poll.
reach : track of last successful polls, 377 is best.
Delay : is network delay, this is fine
offset : offset between local and peer clock (ms) and it should be low.
jitter : Mean deviation (jitter) in the time reported for that remote peer or server.